Send page
Print this page
Disclaimer
ImprintCette page n'est pas disponible dans la langue souhaitée.
bt 188 – Twister
Introduction
The bt 188 twists two preprocessed wires that have undergone different wire end processes. Thanks to Komax's expertise from the Alpha 488 and the mature twisting processes, the bt 188 guarantees excellent twisting quality at an unbeatable price.
Your benefits
- Twisting of conductors in high quality
- Easy to operate
- Optimum pitch and final-length repetition
- Calculation of process parameters based on the values of the end product
- Large range of cross sections and lengths
- Different open ends possible
- Ideal machine for special applications
Function
Final length, pitch length and wire cross section are entered from the OMI and saved in the wire list, thus enabling precise reproduction. The process parameters stretching force, turning speed, overtwist and many else can also be set. This enables a controlled twisting process to be achieved. The twisting process starts after wires have been manually placed in the hold grippers. When this process is completed, the twisted wires are laid in the deposit tray.
Options
- Extension
- Feed tray
- Table base
- Foot pedal
- Twisting of 3 and 4 conductors
Technical data
| Wire cross sections | 2 × 0.08 to 2 × 2.5 mm2 (Optional: 3 or 4 wires) |
|---|---|
| Pitch length | 8 - 50mm |
| Length open ends | Side 1: 25 – 190 mm Side 2: 25 – 85 mm |
| Difference open ends | 0-60mm |
| Final twisted length | 150 – approx. 2500 mm bt 188 * 150 – approx. 5500 mm bt 188 with 1 extension * 150 – approx. 7000 mm bt 188 with 2 extensions * 150 – max. 9999 mm bt 188 with 3 extensions * * Depends on the material and the pitch length |
| Electrical connection | 115/230V-50/60Hz |
| Compressed air connection | 4 - 6bar |
| Dimensions (W×H×D) | 3792 × 1230 × 585 mm ** (Extension: 3000 mm) **Dimensions with table base (optional) |
| Piece output | approx. 330 pcs/h *** ***Conductor FLRY: 2 × 0.5 mm2, pitch: 20 mm, final length: 1000 mm,open ends both sides: 30 mm, overtwist: 25%, wire end processing: cut |