Send page
Print this page
Disclaimer
ImprintCette page n'est pas disponible dans la langue souhaitée.
bt 288 – Wire twisting machine
Introduction
What makes the bt 288 so compelling are its two twist lines and high twisting speed. The machine is designed to twist cable sets in small to medium-sized quantities with perfect results.
Function
The bt 288 system is largely based on the bt 188, a proven performer for many years now and has an additional twist line. Despite its tiny footprint, the semi-automatic twister is exceptionally productive in terms of output and precision. With its optimized work sequence and ergonomically arranged controls, the device reduces fatiguing operating procedures to an absolute minimum.
The intuitive software with touch screen controls is user friendly and allows the twisting parameters to be saved. The bt 288 calculates the required cut length from the final length, pitch length, wire cross section, outside cable diameter and the open ends.
Options
- Extension
- Feed tray bottom/top
- Table base
- Foot pedal
- Twisting of 3 and 4 conductors
Technical data
| Wire cross sections | 2 x 0.08 to 2 x 4.0 mm² (Optional: 3 or 4 wires) |
|---|---|
| Pitch length | 8 – 50 mm |
| Length of open ends | mm Side 2: 25 to max. |
| Length of open ends | Side 1: 25 – 190 mm Side 2: 25 – 85 mm |
| Difference of open ends | 0 – 60 mm |
| Twisted lengths | 200 – approx. 2500 mm bt 288 * 200 – approx. 5500 mm bt 288 with 1 extension * 200 – approx. 7000 mm bt 288 with 2 extensions * 200 – approx. 10000 mm bt 288 with 3 extensions * * Depends on the material and the pitch length |
| Electrical connection | 115/230V-50/60Hz |
| Compressed air connection | 4 – 6bar |
| Dimensions (W×H×D) | 3711 × 1275 × 900 mm ** (Extension: 3000 mm) **Dimensions with table base (optional) |
| Piece number output | Approx. 600pcs/h *** *** FLRY conductor: 2×0.5mm2; pitch: 20mm; final length: 1000mm; open ends both sides: 30mm; overtwist: 25%. |