mci 712/722

The two crimping modules mci 712 and mci 722 are synonymous with perfection in wire-terminal connections. When mounted on Komax fully automated crimping machines and combined with integrated quality monitoring devices, these modules produce crimps of the excellent quality. And now this is even easier. All press settings are programmable and completely integrated into the user software on the basic Komax machine. As a result, setup times are shorter, rejects are reduced and daily outputs are boosted.

For use on all Komax fully automatic crimping machines of the latest generation. With a maximum crimping force of 20kN, continuously adjustable speed and a double-stroke function which can be activated at any time, these devices can process most commercially available terminals. The terminals are taken from carrier strips in open and closed versions of up to 6mm2 and processed into top quality crimps. Appropriate tool fixtures allow an extremely wide variety of applicators to be used.

With its programmed crimp heights, the mci 722 crimping module reduces conversion times by up to 15%. The multifunctional AC servo-drive sets new standards in positioning accuracy. A built-in linear measurement system allows the fine positioning of the press carriage in increments of 0.01mm. Sequential processing of different cross sections can be carried out with no cycle time losses. The mci 712 crimping module has a fixed shut height and is powered by a robust asynchronous motor.

The integrated crimp force analyzer with 3-zone evaluation assures ultra-precise good/bad detection with detailed records on errors. The CFA measures the force and travel of the tappet directly in the process. As a result, even the tiniest errors are recorded, including those involving terminals with little „head room“. Measured quality data is constantly saved and can be evaluated statistically at any time. Every single press undergoes a thorough final test before being delivered to the customer.

The integrated crimp force analyzer with 3-zone evaluation assures ultra-precise good/bad detection with detailed records on errors. The CFA measures the force and travel of the tappet directly in the process. As a result, even the tiniest errors are recorded, including those involving terminals with little „head room“. Measured quality data is constantly saved and can be evaluated statistically at any time. Every single press undergoes a thorough final test before being delivered to the customer.

Integrated quality processes

pic-mci712-722-puzzle400px.jpg

Komax also provides excellent after-sales service.